There are several types of controls used to operate a fire, the most common of which are described below:

Manual control:
A rotary control is situated underneath the burner, which controls all the functions of the appliance. The pilot needs lighting first by pushing the control knob in and turning, this produces a single spark and allows gas to the pilot. (some models have a separate igniter button). The control knob can then be released, and turned clockwise to the high or low position, and the main burner will light. The heat setting can be adjusted by turning the control knob to any position between the high and low setting. To turn the fire off completely the control knob is pushed in slightly and turned clockwise to the off position.

Remote control:
Some fires are now fully remote control and are controlled using a handset. The fires use a motor activated valve to control gas flow to the pilot and the main burner. The fire can be turned ‘On’ and ‘Off’ and the heat settings adjusted to ‘High’ and ‘Low’ by using the handset. Remote control fires are normally battery powered.

Slide Control:
A discreet lever is situated on the side of the fire frame and is used to operate the fire. The lever is mechanically linked to the control underneath the fire. The fire can be turned ‘On’ and ‘Off’ and the heat settings adjusted to ‘High’ and ‘Low’ by using the lever. A battery is required to provide power for the spark to light the pilot.


If you cannot find what you want or you require prices, please contact us on 01254 776 700.